3V3----- Input power supply voltage (3.3,5V is recommended, but not recommended)
GDN----- grounding point
SIO_C --- SCCB control clock interface (Note: Some MCU needs lower pull-up control, and the I 2C like interface)
SIO_D --- SCCB interface serial data input (a) (note: the lower part of the microcontroller need to pull on the control, and the I 2C similar interface)
VSYNC--- frame sync signal (output signal)
HREF---- line sync signal (output signal)
PCLK---- Pixel Clock (Output Signal)
D0-D7--- data port (output signal)
RESTE--- Reset port (normal use pull high)
PWDN---- Power consumption selection mode (normal use pull low)
The image sensor is small in size and low in operating voltage, providing all the features of a single VGA camera and image processor. Through the SCCB bus control, it is possible to output 8-bit influence data of various resolutions such as full frame, sub-sampling, and window. The product's VGA image is up to 30 frames per second. Users have complete control over image quality, data format and transmission. All image processing functions including gamma curve, white balance, saturation, chrominance, etc. can be programmed via the SCCB interface.
● High sensitivity for low illumination applications
● Low voltage for embedded applications
● Standard SCCB interface, compatible with I2C interface
● RawRGB, RGB (GRB4: 2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output format
● Supports VGA, CIF, and various sizes from CIF to 40x30
● VarioPixel subsampling mode
● Automatic influence control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic Eliminate light streaks, automatic black level calibration. Image quality control includes color saturation, hue, gamma, sharpness ANTI_BLOOM
● ISP has noise elimination and dead point compensation
● Supports image scaling
● Lens loss compensation
● 50/60Hz auto Detection
● Saturation auto-adjustment (UV adjustment)
● Edge enhancement auto-adjustment
● Noise reduction automatic adjustment
(1) Photosensitive array 640X480
(2) IO voltage 2.5V to 3.0V (internal LDO supplies 1.8V to the core )
(3) Power consumption 60mW/15fpsVGAYUV
(4) Sleep <20μ A
(5) Temperature operation -30 °C to 70 °C
(6) Stable operation 0 °C to 50 °C
(7) Output format (8-bit)YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data light
(8) size 1/6"
(9) field of view 25°
(10) maximum rate 30fps VGA sensitivity 1.3V / (Lux-sec);
(11) signal to noise ratio of 46 dB
(12) dynamic range of 52 dB
(13) browsing mode line by line
(14) electronic exposure 1 line to 510 lines
(15) pixel area 3.6 μm x 3.6 μ m
(16) dark current 12 mV / s at 60 ° C;